Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 7.001 SLD 3
HIGHER PAYLOAD DUE TO INTELLIGENT LIGHTWEIGHT DESIGN
- Maximum reliability due to PALTRONIC
- Shorter load cycle times due to High Speed Extention
- Maximum utilisation of the working range due to HPSC
Brochures
PK 7.001 SLD 1 | PK 7.001 SLD 3 | PK 7.501 SLD 5
| Max. lifting moment | 6.2 |
| Max. lifting capacity | 3300 |
| Max. hydraulic outreach | 11.2 |
| Max. manual outreach | 12.9 |
| Slewing angle | 400° |
| Slewing torque | 0.8 |
| Stabilizer spread (std) | 3.0 m |
| Fitting space required (std) | 0.66 |
| Width folded | 2.20 |
| Max. operating pressure | 330 |
| Pump capacity | 20 - 30 l/min |
| Dead weight (std.) | 750 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Std | 6.2 mt | 5.5 m | 400 | 0.8 | 33.0 Mpa | 20 - 30 | 750 kg | 1930 mm | 2200 mm | 660 mm | 5300 mm | - | 1160 kg |
| A | 5.9 m | 7.4 m | 400 | 0.8 | 33.0 Mpa | 20 -30 | 830 kg | 1930 mm | 2200 mm | 660 mm | 7200 mm | - | 800 kg |
| B | 5.8 mt | 9.3 m | 400 | 0.8 | 33.0 Mpa | 20-30 | 900 kg | 1930 mm | 2200 mm | 660 mm | 9200 mm | - | 570 kg |
| C | 5.6 mt | 11.2 m | 400 | 0.8 | 33.0 Mpa | 20 - 30 | 960 kg | 1930 mm | 2220 mm | 660 m | 11100 mm | - | 420 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
